Motorola MPMC101 Manuale Utente
3-2
Software Driver Installation
3
Windows NT Operating Systems
The remainder of this chapter describes the procedure for installing
the software driver within the Windows NT 3.51 operating system
for the PCI and PMC Adapters. They can be installed as part of the
Custom setup procedure or from within the Windows NT
environment. For additional instructions on installing and
configuring SCSI adapters with this operating system refer to the
Microsoft Windows NT System Guide.
the software driver within the Windows NT 3.51 operating system
for the PCI and PMC Adapters. They can be installed as part of the
Custom setup procedure or from within the Windows NT
environment. For additional instructions on installing and
configuring SCSI adapters with this operating system refer to the
Microsoft Windows NT System Guide.
Before installing the Windows NT Driver, verify your system meets
the following minimum requirements:
the following minimum requirements:
❏
A Power PC system running Microsoft Windows NT 3.51 or
later.
later.
❏
16MB total system memory.
Installing the Windows NT Driver
The PCI and PMC Adapters use the NCR 53C825 SCSI controller.
Drivers for this controller are already included in the Microsoft
Windows NT version 3. 51 operating system.
Drivers for this controller are already included in the Microsoft
Windows NT version 3. 51 operating system.
To install the PCI and PMC Adapters hardware driver:
1. Click on the Windows NT Setup icon from the Main group
to display the dialog shown in
Figure 3-1. Windows NT Setup