Allied Telesis AT-TQ2403 Manuale Utente

AT-TQ2403 Management Software User's Guide 

223 

welcome-screen-text   Thank you for using wireless Guest Access as provided by this 
AT-TQ2403. Upon clicking "Accept", you will gain access to our wireless guest network. This 

network allows complete access to the Internet but is external to the corporate network. 

Please note that this network is not configured to provide any level of wireless security. 

To enable the Guest welcome page: 

AT-TQ2403# set portal status up 

To disable the Guest welcome page: 

AT-TQ2403# set portal status down 

To specify the text for the Guest welcome page: 

AT-TQ2403# set portal welcome-screen-text "Welcome to the Bewitched Network" 

The following example shows the results of the "set portal" command after specifying some new settings: 

AT-TQ2403# get portal 

Property 

  Value 

----------------------------------------------------- 

status 

  up 

welcome-screen  

on 

welcome-screen-text 

Welcome to the Bewitched Network 

 



Note: Before configuring this feature, make sure you are familiar with the names of the 

interfaces as described in “

”. The interface 

name you reference in a command determines whether a setting applies to a wired or 

wireless interface, the Internal or Guest network, or (on a dual-radio AP) to radio "one" or 

radio "two". 

 

To configure additional networks on VLANs, you must first enable Virtual Wireless Networks. You can 

add up to a maximum of 14 VWNs. 

Find out whether VWNs are enabled 

or not 

get access-point vwn-status