Allied Telesis AT-TQ2403 Manuale Utente
224
AT-TQ2403 - Management Software - User's Guide
Feature or Setting
CLI Command
Enable or Disable a VWN
set vwn vwnx status up
This will enable VWN x.
set vwn vwnx status down
This will disable VWN x.
Where x is the VWN number. The VWN number can be
between 1 and 14.
Get the VLAN ID of a VWN
get vwn vwnx vlan-id
Where x is the VWN number. The VWN number can be
between 1 and 14.
Set the VLAN ID of a VWN
set vwn vwnx vlan-id
Where vlan-id is a value between 1 and 4096.
Get the SSID of a VWN
get interface wlan0vwnx ssid
Where x is the VWN number. The VWN number can be
between 1 and 14.
Set the SSID for a VWN
set interface wlan0vwnx ssid ssid
set interface wlan1vwnx ssid ssid
(You must set the SSID on both radios on an AP)
Where x is the VWN number and ssid is the ssid for the
VWN. The VWN number can be between 1 and 14. The ssid
can be any alphanumberic string up to 32 characters.
can be any alphanumberic string up to 32 characters.
Determine whether Broadcast SSID is
enabled
enabled
get bss wlan0bssvwn<x> ignore-broadcast-ssid
Enable or Disable the Broadcast SSID
Disable Broadcast SSID
set bss wlan0bssvwnx ignore-broadcast-ssid on
set bss wlan1bssvwnx ignore-broadcast-ssid on
(You must disable both radios)
Enable Broadcast SSID
set bss wlan0bssvwnx ignore-broadcast-ssid off
set bss wlan1bssvwnx ignore-broadcast-ssid off
(You must enable both radios)