Cisco Systems 7609 Manuale Utente
3-19
Cisco 7609 Internet Router Installation Guide
OL-5079-04
Chapter 3 Installing the Cisco 7609 Internet Router
Attaching the Interface Cables
Note
When you plug the SC-type connector into the GBIC, make sure that
both the transmit (Tx) and receive (Rx) fiber-optic cables are fully
inserted into the SC-type connector.
both the transmit (Tx) and receive (Rx) fiber-optic cables are fully
inserted into the SC-type connector.
Note
If you are using the LX/LH GBIC with MMF, you need to install a
patch cord between the GBIC and the MMF cable.
patch cord between the GBIC and the MMF cable.
Connecting to the Interface Ports
Note
For connector specifications, see
The Optical Services Modules (OSMs) and supported Catalyst 6000 family
modules have the following interface ports:
modules have the following interface ports:
•
OC-3 POS, OC-12 POS, OC-48 POS, and OC-12 ATM OSMs—SC-Type
Fiber Optic (See
Fiber Optic (See
.)
•
Channelized OC-12 and OC-48 OSMs—LC fiber-optic connectors
(See
(See
•
OC-48 POS OSM—MT-RJ fiber-optic connector (See
.)
•
Catalyst 6000 family 48-port 10/100TX switching modules—RJ-45
(See
(See
Figure 3-9
SC-Type Fiber-Optic Connector
H2214