Cisco Systems WES610N Manuale Utente

Advanced Configuration

Linksys WES610N/WET610N

Use this method if your router requests the PIN number of the bridge 

1.  On the router’s Wi-Fi Protected Setup screen, enter the PIN number on 

the  bridge’s  Wi-Fi  Protected  Setup  screen   Then  click  Register  or  the 
appropriate button  (It is also listed on the label on the bottom of the 
bridge )

2.  On the bridge’s Wi-Fi Protected Setup screen, click OK 
3.  After the bridge has been configured, click Close 

The Wi-Fi Protected Setup screen displays the Link Status, Network Name (SSID), 
and Security method 

Click the Wireless Network Site Survey tab to begin a site survey  The Wireless 
Network Site Survey screen lists the wireless networks detected by the bridge 

The number of wireless networks detected by 

the bridge is displayed 

To connect to a wireless network, click Select  Then click Connect 

The network name or SSID of the wireless network 

is displayed 

The radio band of the wireless network is displayed 

The percentage of signal strength is displayed  100% is the strongest 

signal strength possible; 0% is the weakest possible 

If  the  network  supports Wi-Fi  Protected  Setup,  the Wi-Fi  Protected 

Setup icon 

 is displayed  The security method used by the wireless network 

is displayed 

Click Refresh to update the on-screen information 

After you have selected a network, click Connect  A new screen appears  Follow 
the instructions for the security method of your network 

The name of the network you selected is automatically 

displayed 

WPA Personal is automatically displayed 

WPA  supports  the  TKIP  encryption  method,  with  dynamic 

encryption keys  

 Enter the key shared by the bridge and wireless router or access 

point  It must have 8-63 characters 

Click Refresh to update the on-screen information 

After you have entered the security settings, click Connect