Cisco Systems WES610N Manuale Utente

Advanced Configuration

Linksys WES610N/WET610N

The name of the network you selected is automatically 

displayed 

WPA2 Personal is automatically displayed 

WPA2  supports  two  encryption  methods,  TKIP  and  AES,  with 

dynamic encryption keys  Select the encryption method, AES or TKIP or AES  

 Enter the key shared by the bridge and wireless router or access 

point  It must have 8-63 characters 

Click Refresh to update the on-screen information 

After you have entered the security settings, click Connect 

The name of the network you selected is automatically 

displayed 

WEP is automatically displayed 

Select  a  level  of WEP  encryption,  40/64 bits  (10  hex  digits)  or 

104/128 bits (26 hex digits) 

Enter the WEP key of your network 

Key 1 is the transmit key used by the bridge 

The default is Auto, which allows either Open system or Shared 

key authentication to be used  Select Open to use open system authentication; 
the  sender  and  recipient  do  not  use  a  WEP  key  for  authentication   Select 
Shared to use shared key authentication; the sender and recipient use a WEP 
key for authentication 

Click Refresh to update the on-screen information 

After you have entered the security settings, click Connect 

Configure the Wireless MultiMedia (WMM) settings  WMM prioritizes packets 
depending  on  their  respective  access  mode  (traffic  type):  Background,  Best 
Effort, Video,  or Voice  These  settings  should  only  be  adjusted  by  an  expert 
administrator as incorrect settings can reduce wireless performance 

The settings on the WMM screen are designed for advanced users 
only