Cisco Systems Cisco 12816 Manuale Utente

In either case, you cannot use a number as the first character. Spaces, however, are 
valid password characters. For example, two words is a valid password. Leading 
spaces are ignored, but trailing spaces are recognized. 

Make a note of all passwords you set and store that information in a secure 
location for future reference.

For complete information on protocol configuration for your router, refer to the 
appropriate software configuration publications, which are listed in the 

. 

This section summarizes network interface configuration for the RP and the 
installed line cards using the setup facility or setup command. After the RP and 
line cards are configured, they can communicate with external networks.

To configure the interface parameters for the RP and installed line cards, you must 
have the following information available:

Interface network addresses

Subnet mask values

Protocols to be configured

You may need to consult your network administrator to obtain this information. 
For additional interface configuration information for the RP and line cards 
installed in your router, refer to the documentation for each card.

The RJ-45 and MII receptacles on the GRP and PRP are IEEE 802.3u-compliant 
interfaces that provide connectivity to Ethernet networks. You can use one 
interface or the other, but not both at the same time.