NEC 2000 IPS Manuale Utente

Chapter 1   Introduction 
 
 

Page 1-12 

UNIVERGE 

NEAX

 2000 IPS Request for Proposal (RFP) Reference Guide 

 

 

          Issue 6 

 
The illustration below shows a typical system layout.  

 

For DtermIP to DtermIP connection (Peer to Peer connection), the voice data is transmitted and 
received directly between DtermIPs on the LAN.  For Dterm Legacy terminal connection, the IP-
PAD card and VCT card are required to transmit and receive the voice data.  These cards are used 
to control and convert the voice data.  The MP card in either of the connections above manages the 
control signals

. 

DtermIP to DtermIP connection (Peer to Peer connection) via CCIS is available only when the 
destination office is 

 

NEAX

 

2000 IPS or 

 

NEAX

 

2400 IPX.  The system 

provides only Point to Multipoint connection

. 

MATWorX IPS is used as the maintenance program for the 

 

NEAX

 

2000 IPS.  Direct 

connection (RS-232C), Modem connection and LAN (TCP/IP) connections are available to connect 
to the MAT (Maintenance Administration Terminal).  

 

COT

LC/DLC 

)