NEC 2000 IPS Manuale Utente
Chapter 2 System Architecture
Page 2- 12
UNIVERGE
NEAX
2000 IPS
Request For Proposal (RFP) Reference Guide
Issue 6
IPS DMR Modular Chassis (MC)
There are 2 types of MODULAR CHASSIS; "Physical MODULAR CHASSIS" and "Virtual MODULAR
CHASSIS ". The Physical MODULAR CHASSIS is a “hardware MODULAR CHASSIS” and is used to
accommodate an MP, IP PADs, legacy LT/AP cards, and power supply units. The IPS DMR
CHASSIS ". The Physical MODULAR CHASSIS is a “hardware MODULAR CHASSIS” and is used to
accommodate an MP, IP PADs, legacy LT/AP cards, and power supply units. The IPS DMR
can
consist of one or two MODULAR CHASSIS depending on the system configuration. The Physical
MODULAR CHASSIS provides 56 LT ports in hardware slots and provides 64 ports in software port
allocation (56LT ports and 8 virtual ports). The Virtual MODULAR CHASSIS is a “software MODULAR
CHASSIS” with a port capacity of 64 ports. A maximum of two Virtual MODULAR CHASSIS can be
assigned per remote site for a total of 128 ports used to accommodate IP stations by system data
programming. The maximum number of Remote Sites is 30. This system allocates the maximum of 64
FP/AP cards per system, at multiple Remote Sites. The number of FP/AP cards accommodated at one
Remote Site should be a maximum of eight including the MP with built-in FP. If more than eight FP/APs
are assigned, the system does not operate normally.
The following illustration shows MODULAR CHASSIS hardware configurations, software port allocation,
face layout and rear view of MODULAR CHASSIS for IPS DMR.
MODULAR CHASSIS provides 56 LT ports in hardware slots and provides 64 ports in software port
allocation (56LT ports and 8 virtual ports). The Virtual MODULAR CHASSIS is a “software MODULAR
CHASSIS” with a port capacity of 64 ports. A maximum of two Virtual MODULAR CHASSIS can be
assigned per remote site for a total of 128 ports used to accommodate IP stations by system data
programming. The maximum number of Remote Sites is 30. This system allocates the maximum of 64
FP/AP cards per system, at multiple Remote Sites. The number of FP/AP cards accommodated at one
Remote Site should be a maximum of eight including the MP with built-in FP. If more than eight FP/APs
are assigned, the system does not operate normally.
The following illustration shows MODULAR CHASSIS hardware configurations, software port allocation,
face layout and rear view of MODULAR CHASSIS for IPS DMR.
1 MODULAR CHASSIS
2 MODULAR CHASSIS
56
LT ports
56
LT ports
8 Virtual
LT ports
8 Virtual
LT ports
LT ports
8 Virtual
LT ports
MC-1
MC-0
56
LT ports
8 Virtual
LT ports
LT ports
MC-0
Virtual
MODULAR
CHASSIS
(128 IP Ports)
Virtual
MODULAR
CHASSIS
(128 IP Ports)
IPS DMR MODULAR CHASSIS Hardware Configuration
MODULAR CHASSIS Software Port Allocation
256 AP Ports per System