Netopia R7200 Manuale Utente

feature, the modem options are hidden.

For a Netopia R7200, connection profiles are useful for configuring the connection and authentication settings 
for negotiating a PPP connection on the SDSL link or on an asynchronous modem attached to the Auxiliar y por t. 
If you are using the PPP data link encapsulation method, you can store your authentication information in the 
connection profile so that your user name and password (or host name and secret) are transmitted when you 
attempt to connect.

Connection profiles define the networking protocols necessar y for the router to make a remote connection. A 
connection profile is like an address book entr y describing how the router is to get to a remote site, or how to 
recognize and authenticate a connection. To create a new connection profile, you navigate to the WAN 
Configuration screen from the Main Menu, and select Add Connection Profile.

The Add Connection Profile screen appears.

On a Netopia R7200 SDSL Router you can add up to 15 more connection profiles, for a total of 16, but you can 
only use one at a time.

1.

Select Profile Name and enter a name for this connection profile. It can be any name you wish. For 
example: the name of your ISP.

2.

Toggle Profile Enabled to Yes or No. The default is Yes.

Main

Menu

WAN

Configuration

Add Connection

Profile

                             Add Connection Profile

         Profile Name:                      Profile 01
         Profile Enabled:                   Yes

         IP Enabled:                        Yes
         IP Profile Parameters...

         IPX Enabled:                       No

         Data Link Encapsulation...         RFC1483

         Interface Group...                 Primary

         ADD PROFILE NOW                    CANCEL

Configure a new Conn. Profile. Finished?  ADD or CANCEL to exit.