Netopia R7200 Manuale Utente

3.

Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.

4.

Toggle or enter any IP Parameters you require and return to the Add Connection Profile screen by pressing 
Escape. For more information, see 

.

5.

If you will be connecting with an IPX remote network, toggle IPX Enabled to Yes, and press Return. 
Other wise, accept the default No.

If you enable IPX routing, an IPX Profile Parameters menu item becomes available. Select IPX Profile 
Parameters and press Return. The IPX Profile Parameters screen appears.

                            IP Profile Parameters

         Address Translation Enabled:       Yes

         Local WAN IP Address:              0.0.0.0

         Remote IP Address:                 0.0.0.0
         Remote IP Mask:                    0.0.0.0

         Filter Set...
         Remove Filter Set

         Receive RIP:                       Off

Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.

                            IPX Profile Parameters

         Remote IPX Network:                          00000000
         Path Delay:                                  10
         NetBios Packet Forwarding:                   Off

         Incoming Packet Filter Set...                <<NONE>>
         Outgoing Packet Filter Set...                <<NONE>>

         Incoming SAP Filter Set...                   <<NONE>>
         Outgoing SAP Filter Set...                   <<NONE>>

         Periodic RIP Timer:                          60
         Periodic SAP Timer:                          60

Configure IPX requirements for a remote network connection here.