Nortel Networks Passport ARN Routers Manuale Utente

Installing and Operating Passport ARN Routers

A-4

114200-E Rev 00

To configure any ARN Ethernet interface for network booting, use the following 
command format:

 [

] 

<interface> [<IP_address> <subnet_mask>  [<next_hop_address>]]

 describes the 

 command settings for configuring the router’s 

Ethernet interface.

<subnet_mask>

Specifies the IP subnet mask of the interface you set with 

<interface>. 

Provide this address in dotted decimal notation.

<next_hop_
address>

Specifies the IP address of the next-hop router. Provide this address 
in dotted decimal notation. Specify this address only if there are 
intermediate routers between the router and the BootP server.

Resets the router IP interface settings to the default values. Resetting 
an Ethernet interface makes it inactive in the network booting process. 
(The output of the getcfg command shows the default as None.)

<interface>

Specifies the IP connector you are configuring. Use the format
xcvr<

port #>.

<IP_address>

Specifies the IP address of the interface you set with 

<interface>. 

Provide this address in dotted decimal notation.

<subnet_mask>

Specifies the IP subnet mask of the interface you set with 

<interface>. 

Provide this address in dotted decimal notation.

<next_hop_
address>

Specifies the IP address of the next-hop router. Provide this address in 
dotted decimal notation. Specify this address only if there are 
intermediate routers between the router and the BootP server.

 (continued)