Siemens SS2604 Manuale Utente

DSL/Cable Router User Guide

4

For each LAN port, there are 2 LEDs

•

  Link/Act

•

  On - Corresponding LAN (hub) port is active.

•

  Off - No active connection on the corresponding LAN (hub) port.

•

  Flashing - Data is being transmitted or received via the corre-

sponding LAN (hub) port.

•

  100

•

  On - Corresponding LAN (hub) port is using 100BaseT.

•

  Off - Corresponding LAN (hub) port connection is using

10BaseT, or no active connection.

Flashing - data is being transmitted or received via the WAN port.

Off - no data is being transferred.

On - Connection to printer established.

Off - No connection to printer; printer is Off or Off-line.

Flashing - Data is being transmitted to the printer.

On - Printer error detected.

Off - No printer error detected.

Standard parallel printer port. If you wish to share a printer, connect
it here.

This button has three (3) functions:

•

  Reboot.  When pressed and released, the DSL/Cable Router

will reboot (restart).

•

  Diagnostic print-out.  If held down for 3 seconds, a diagnostic

print-out will be sent to the attached printer.

•

  Ensure the printer is ready.

•

  Both Print LEDs will flash simultaneously during the di-

agnostic printing.

•

  Restore Factory Defaults.  This button can also be used to

clear ALL data and restore ALL settings to the factory default
values.

To Clear All Data and restore the factory default values:
1.  Power Off the router.