Siemens SS2604 Manuale Utente
Introduction
5
2. Hold the Reset Button down while you Power On the router.
3. Continue holding the Reset Button until the Status (Red) LED
3. Continue holding the Reset Button until the Status (Red) LED
blinks TWICE.
4. Release the Reset Button.
The factory default configuration has now been restored, and
the Router is ready for use.
the Router is ready for use.
WAN port
(10BaseT)
(10BaseT)
Connect the DSL or Cable Modem here. If your modem came with
a cable, use the supplied cable. Otherwise, use a standard LAN
cable.
a cable, use the supplied cable. Otherwise, use a standard LAN
cable.
10/100BaseT
LAN connectors
LAN connectors
Use standard LAN cables (RJ45 connectors) to connect this port to
your PCs. Both 10BaseT and 100BaseT connections can be used
simultaneously.
your PCs. Both 10BaseT and 100BaseT connections can be used
simultaneously.
LAN1 can act either as a normal port, or an "Uplink" port for
connection to another Hub. See the "Normal/Uplink" button
below.
connection to another Hub. See the "Normal/Uplink" button
below.
Normal/Uplink
Button- Optional
Button- Optional
If this button is present, it allows LAN port 1 to be used as an
Uplink port for connecting directly to another hub.
Uplink port for connecting directly to another hub.
When depressed (in), then the "LAN 1" port becomes an "Uplink"
port, and must be connected to a normal port on another Hub.
port, and must be connected to a normal port on another Hub.
If this button is extended (out), then the "LAN 1" port acts as a
normal LAN port.
normal LAN port.
Power port
Connect the supplied power adapter here.