Rosewill RNWB-11001 Manuale Utente

)

 

1)  If you change the IP Address of LAN, you must use the new IP Address to log in the 

Router.  

2)  If the new LAN IP Address you set is not in the same subnet, the IP Address pool of 

the DHCP server will change accordingly at the same time，while the Virtual Server 

and DMZ Host will not take effect until they are re-configured. 

Choose menu “Network → WAN”, you can configure the IP parameters of the WAN on 

the screen below. 

1.  If your ISP provides the DHCP service, please choose Dynamic IP type, and the 

Router will automatically get IP parameters from your ISP. You can see the page as 

follows (Figure 4-7): 

 

Figure 4-7

    WAN – Dynamic IP

 

This page displays the WAN IP parameters assigned dynamically by your ISP, 

-39-