Rosewill RNX-N150RT Manuale Utente

 

- 54 - 

There are three submenus under the DHCP menu (shown in Figure 4-26), DHCP Settings, 

DHCP Clients List and  Address Reservation. Click any of them, and you will be able to 

configure the corresponding function. 

Choose menu “DHCP → DHCP Settings”, you can configure the DHCP Server on the page as 

shown in Figure 4-27.The Router is set up by default as a DHCP (Dynamic Host Configuration 

Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to 

the Router on the LAN.   

 

Figure 4-27 DHCP Settings 

¾

 

DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must 

have another DHCP server within your network or else you must configure the computer 

manually. 

¾

 

Start IP Address - Specify an IP address for the DHCP Server to start with when assigning 

IP addresses. 192.168.1.100 is the default start address. 

¾

 

End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP 

addresses. 192.168.1.199 is the default end address. 

¾

 

Address Lease Time - The Address Lease Time is the amount of time a network user will 

be allowed connection to the Router with their current dynamic IP Address. Enter the 

amount of time in minutes and the user will be "leased" this dynamic IP Address. After the 

time is up, the user will be automatically assigned a new dynamic IP address. The range of 

the time is 1 ~ 2880 minutes. The default value is 120 minutes. 

¾

 

Default Gateway - (Optional.) It is suggested to

 

input the IP address of the LAN port of the 

Router. The default value is 192.168.1.1.