USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router Manuale Utente

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide 

 

 

 

 

To help diagnose the problem, use the checklist below. 

●     

Confirm that you have secured the power adapter to the router and to an active wall outlet. The "PWR" LED should 
illuminate.

●     

Confirm that you have secured the telephone cable to the telephone wall jack and to the router. The "ADSL"LED 
should illuminate.

●     

Confirm that you have secured the Ethernet cable to the "ENET1"and/or "ENET2" port on the router and to the 
computer's network interface card. The "ENET1" or the "ENET2" LED, or both should illuminate. 

●     

If you're using the USB cable: Confirm that you've secured the USB cable to the "USB" port on the router and 
computer. The "USB" LED should illuminate.

The front of the U.S. Robotics SureConnect ADSL Ethernet/USB Router has five LEDs. The first from the left is the "PWR" 
LED. The second and third are the data transfer "ENET1" and "ENET2" LEDs. The fourth is the "USB" LED. The fifth is the 
"ADSL" LED. LED conditions below indicate the router's operational status.

PWR

On Green

Receiving power from the wall jack power supply.

Off

Detected no power.

On Green/10 Mbps

On Orange/100Mbps

Established and detected a physical connection through the Ethernet cable 
between router and computer.

file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/troubles.htm (1 of 7) [11/6/2002 9:02:16 AM]