Avaya X330W2-DS1 Manuale Utente
Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide
85
The syntax for this command is:
[no] ip vrrp <vr-id> preempt
[no] ip vrrp <vr-id> preempt
Example:
X330WAN-2DS1-1(configure)# ip vrrp 1 preempt
(ip vrrp) primary
Use the
ip vrrp primary command to set the primary address that shall be
used as the source address of VRRP packets for the virtual router ID. Use the
no
form of this command to return to the default primary address for the virtual router
instance. By default, the primary address is selected automatically by the device.
instance. By default, the primary address is selected automatically by the device.
Note:
This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
The syntax for this command is:
[no] ip vrrp <vr-id> primary <ip-address>
[no] ip vrrp <vr-id> primary <ip-address>
Example:
ip vrrp 1 primary 192.168.66.23
(ip vrrp) priority
Use the
priority option to set the virtual router priority value used when
selecting a master router. Use the
no form of this command to restore the default
value.
Note:
This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
vr-id
Virtual Router ID (1-255)
vr-id
Virtual Router ID (1-255)
ip-address
Primary IP address of the virtual router. This address
should be one of the router addresses on the Fabric.
should be one of the router addresses on the Fabric.