Avaya X330W2-DS1 Manuale Utente
Chapter 7
X330WAN CLI Commands
126
Avaya X330W-2DS1 User’s Guide
controller’s description.
Note:
This command can also be executed from the Serial, Loopback, Fast Ethernet
and Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] description
<desc>
Examples:
X330WAN-2DS1-1(config-controller:1)# description "E1
controller"
X330WAN-2DS1-1(config-controller:1)# no description
description (Interface context)
Use the description command to set the description of the interface. Use the no
form of this command to remove the interface’s description.
form of this command to remove the interface’s description.
Note:
This command can also be executed from the Serial, Loopback, Fast Ethernet
and Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] description
<desc>
Examples:
X330WAN-2DS1-1(config-if:FastEthernet1)# description vlan5
ds-mode
Use the ds-mode command to set the controller’s mode.
desc
A string describing the E1/T1 interface. The string may contain
blanks and is up to 255 characters long.
blanks and is up to 255 characters long.
desc
A string describing the interface.