Avaya X330W2-DS1 Manuale Utente

Chapter 7

X330WAN CLI Commands

72

Avaya X330W-2DS1 User’s Guide

This command exists for compatibility with P550. There is no limitation on the size 
of the routing table, except for the amount of available memory. Use the no form of 
this command to set the maximum number of route entries in the routing table to its 
default value.

The syntax for this command is:
[no] ip max-route-entries <value>

Use the

 ip netbios-rebroadcast command to set NETBIOS rebroadcasts 

mode on an interface. The no form of this command disables NETBIOS 
rebroadcasts on an interface.

This command is executed from the Serial, Fast Ethernet and Fabric Fast 

Ethernet interfaces.

The syntax for this command is:
[no] ip netbios-rebroadcast [<direction>]
The possible values of 

direction is: 

Example:
To enable rebroadcasting of netbios packets received by and sent from the interface 
“marketing”:

X330WAN-2DS1-1(configure)# ip netbios-rebroadcast both

X330WAN-2DS1-1(configure)# ip netbios-rebroadcast 

value

number of entries. The range of accepted values is 100 to 
20000.

both

Netbios packets received on the interface 
rebrodcasted to other interfaces and netbios packets 
received on other interfaces are rebroadcasted into 
this interface.
If no parameter is provided in the command, the 
"both" optionis applied as the default.

disable

Netbios packets are not rebroadcasted into or out of 
this interface.