Avaya X330W2-DS1 Manuale Utente
Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide
73
ip netmask-format
Use the
ip netmask-format command to specify the format of netmasks in the
show
command output. The no form of this command restores to the default,
which is a dotted decimal format.
The syntax for this command is:
[no] ip netmask-format
<mask-format>
The possible mask formats are:
Example:
To display netmasks in bitcount format:
To display netmasks in bitcount format:
X330WAN-2DS1-1(configure)# ip netmask-format bitcount
ip ospf authentication-key (Interface context)
Use the ip ospf authentication-key command to configure the interface
authentication password. The
authentication password. The
no form of this command removes the OSPF
password.
Note:
This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] ip ospf authentication-key
<key>
Example:
config-if:ip ospf authentication-key my_pass
bitcount
Addresses are followed by a slash and the total number of bits
in the netmask, for example, 17.
in the netmask, for example, 17.
decimal
The network masks are in dotted decimal notation. For
example, 255.255.255.0.
example, 255.255.255.0.
hexadecimal
The network masks are in hexadecimal format as indicated by
the leading 0X. For example, 0XFFFFFF00.
the leading 0X. For example, 0XFFFFFF00.
key
A string (up to 8 characters)