ZyXEL Communications wireless n gigabit netusb router Manuale Utente

NBG4615 User’s Guide

This chapter provides tutorials for setting up your NBG4615.

•

•

•

•

•

•

This section gives you an example of how to set up wireless network using WPS. This example uses 
the NBG4615 as the AP and NWD210N as the wireless client which connects to a notebook. 

Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter 

or PCI card).

There are two WPS methods for creating a secure connection. This tutorial shows you how to do 
both.

• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a 

.This is the easier method.

• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN 

(Personal Identification Number) in the NBG4615’s interface. See 

. 

This is the more secure method, since one device can authenticate the other.

Make sure that your NBG4615 is turned on. Make sure the WLAN switch (at the back panel of the 
NBG4615) is set to ON, and that the device is placed within range of your computer. 

Make sure that you have installed the wireless client (this example uses the NWD210N) driver and 
utility in your notebook.

In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or 
WPS button)