Gefen EXT-HDKVM-LAN Manuale Utente

page | 23

Switching between Sender units in Unicast mode

When multiple Sender and Receiver unit are used in unicast mode, the HD KVM over IP

behaves as a switcher. In unicast mode, a Sender unit can communicate with only one

Receiver unit at a time.

In the example below, we will switch Receiver unit R1 to receive the Hi-Def source on

Sender unit S1.

Figure 2.2 - Unicast mode: Receiver unit R1 is connected to Sender unit S2.

1. Access the Web interface for Receiver unit R1.

2. Click the

Network tab and change the video channel. Refer to

if necessary.

3. Click the

Save button.

4. The following message will be displayed, at the top of the page, indicating that the

casting mode has been applied to the Sender or Receiver unit.

5. Receiver unit R1 is now receiving the Hi-Def source on Sender unit S1, as shown on

the next page.

Operating the HD KVM over IP

Unicast and Multicast Modes

LAN

Receiver unit

HDMI Out

Sender unit

HDMI In