Gefen EXT-COMPAUD-CAT5-444 Manuale Utente
5
Power LED Indicator
1
This LED will become active once the included 24V DC power adapter is
properly connected.
properly connected.
Output 1 Source LED Indicator
2
The currently selected source being displayed on Monitor Output 1 will be
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
Output 2 Source LED Indicator
3
The currently selected source being displayed on Monitor Output 2 will be
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
Output 3 Source LED Indicator
4
The currently selected source being displayed on Monitor Output 3 will be
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
Output 4 Source LED Indicator
5
The currently selected source being displayed on Monitor Output 4 will be
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
IR Receiver
6
This port will receive IR commands from the included RMT-16IR remote control.
Power Button
7
Pressing this button while the unit is on will place the unit in stand-by mode.
Pressing this button again while the unit is in stand-by will turn it on.
Pressing this button again while the unit is in stand-by will turn it on.
Output 1 Source Button
8
Each press of this button will cycle through the 4 inputs which will be displayed
on the Monitor Output 1.
on the Monitor Output 1.
Output 2 Source Button
9
Each press of this button will cycle through the 4 inputs which will be displayed
on the Monitor Output 2.
on the Monitor Output 2.
Output 3 Source Button
10
Each press of this button will cycle through the 4 inputs which will be displayed
on the Monitor Output 3.
on the Monitor Output 3.
Output 4 Source Button
11
Each press of this button will cycle through the 4 inputs which will be displayed
on the Monitor Output 4.
on the Monitor Output 4.
4X4 COMPONENT MATRIX OVER CAT-5 FRONT
PANEL DESCRIPTIONS