Carrier Access SNMP Manuale Utente
7-2
9/24/01
itor User’s Guide.
7.2 Remote Monitor Software Program
7.2.1 Overview
The Access Bank Remote Monitor software interface is used to configure and manage the Access
Bank via the RS-232 Management Port. Installed on a local IBM-compatible PC or laptop connected
to the RS-232 Management port, Remote Monitor provides a convenient user-friendly software inter-
face for configuring, monitoring, and testing the performance of the Access Bank. The Remote Mon-
itor software can also be downloaded into a remote computer for dial-in/dial-out management over a
separate PSTN (Public Switched Telephone Network) analog line. In this application, Remote Moni-
tor can also be used to poll the Access Bank for remote alarms via a Hayes
Bank via the RS-232 Management Port. Installed on a local IBM-compatible PC or laptop connected
to the RS-232 Management port, Remote Monitor provides a convenient user-friendly software inter-
face for configuring, monitoring, and testing the performance of the Access Bank. The Remote Mon-
itor software can also be downloaded into a remote computer for dial-in/dial-out management over a
separate PSTN (Public Switched Telephone Network) analog line. In this application, Remote Moni-
tor can also be used to poll the Access Bank for remote alarms via a Hayes
-compatible modem
attached to the secondary connectors of the RS-232 Management port. Figure 7-1 illustrates these
two different ways of connecting Remote Monitor to the Access Bank.
two different ways of connecting Remote Monitor to the Access Bank.
Figure 7-1: Remote Monitor Connections
7.3 Message Traffic
The Remote Monitor software supports three classes of message traffic between the PC and the
Windows Based
Remote Monitor
Remote Monitor
Access Bank II
Modem
Modem
Windows Based
Remote Monitor
Remote Monitor
Access Bank II