Siemens D410 Manuale Utente
Commissioning (software)
4.2 Configuring the system in offline mode
D410
Commissioning Manual, 08/2008 Edition
Commissioning Manual, 08/2008 Edition
67
Figure 4-6
Selecting a motor holding brake
7. Select the encoder order number in the "Encoder selection by motor order number" if
using a motor that is not equipped with a DRIVE-CLiQ interface.
Figure 4-7
Selecting the encoder order number
8. In the following dialog, select the PROFIBUS message frame.
The following message frames can be used, for example, in conjunction with SINAMICS
S120 drives:
– SIEMENS message frame 105, PSD-10/10: Dynamic life sign, torque reduction,
– SIEMENS message frame 105, PSD-10/10: Dynamic life sign, torque reduction,
encoder data for an encoder, dynamic drive control (DSC)