Sanyo PLC-XU355K Manuale Utente

TO MAINTAIN THE LIFE OF THE LAMP, ONCE 

YOU TURN THE PROJECTOR ON, WAIT AT 

LEAST FIVE MINUTES BEFORE TURNING IT 

OFF.

 disappears after 4 seconds.

Press the ON/STAND-BY button on the top control or 

on the remote control, and Power off? appears on the 

screen.
Press the ON/STAND-BY button again to turn off the 

projector. The POWER indicator starts to blink red, and 

the cooling fans keep running (You can select the level 

of fans’ quietness and speed. See "Fan" on page 58.). 

At this time, you can unplug the AC power cord even if 

the fans are still running.

When the projector has cooled down enough, the 

POWER indicator stops blinking and you can turn on 

the projector. 

Note:
  • When the On start function is set to On, the projector will 

be turned on automatically by connecting the AC power 

cord to an AC outlet (p.54).

  • The running speed of cooling fans is changed according 

to the temperature inside the projector.

  • Do not put the projector in a case before the projector is 

cooled enough.

  • If the WARNING indicator blinks or lights red, see 

"WARNING indicator" on page 61.

  • While the POWER indicator is blinking, the lamp is being 

cooled down and the projector cannot be turned on. Wait 

until the POWER indicator stops blinking to turn on the 

projector again.

  • The  fan  rotation  will  terminate  directly  if  the AC  power 

cord  is  unplugged  immediately  after  the  projector  is 

turned off.

  • The  projector  can  be  turned  on  after  the  POWER 

indicator  turns  red. The  waiting  time  to  restart  will  be 

shortened when the normal power-off processing for fan 

cooling  is  completed,  compared  with  the  time  the AC 

power  cord  is  immediately  unplugged  after  the  power-

off. 

DO NOT OPERATE THE PROJECTOR 

CONTINUOUSLY WITHOUT REST. CONTINUOUS 

USE MAY RESULT IN SHORTENING THE LAMP 

LIFE. TURN OFF THE PROJECTOR AND LET 

STAND FOR ABOUT AN HOUR IN EVERY 24 

HOURS.