Sanyo PLC-XU355K Manuale Utente

Choose Video or S-video by pressing the INPUT button on

the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be

selected through menu operation as described below.

When  video  input  signal  is  connected  to  the

VIDEO jack, select Video.

When video input signal is connected to the S-

VIDEO jack, select S-video.

Note:

 • Network  is  for  the  Network  function.  See  the  owner’s

manual “Network Set-up and Operation” .

 • When the Input Search function is set to On1 or On in

the Auto setup function, the input signal will be searched

automatically (p.47).

Press the MENU button to display the On-Screen

Menu. Use the Point

▲▼

buttons to select Input and

then press the SELECT button.

Use the Point

▲▼

buttons to select either Video or

and then press the SELECT button.