Sanyo PLC-XU355K Manuale Utente

Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or

press the COMPUTER button on the remote control.

Before  using  these  buttons,  correct  input  source  should  be  selected  through  Menu  operation  as  described

below.

Use the Point

▲▼

buttons to select Computer 1 and

then press the Point

►

button.

When the input source is coming from video

equipment  connected  to  the  COMPUTER

IN  1/COMPONENT  IN  terminal  with  a

Component-VGA Cable, select Component.

When the input source is coming from video

equipment  connected  to  the  COMPUTER

IN 1/COMPONENT IN terminal with a Scart-

VGA Cable, select RGB (Scart).

Press  the  MENU  button  to  display  the  On-Screen

Menu. Use the Point

▲▼

buttons to select Input and

then press the Point

►

or SELECT button.

Note:

 • Network  is  for  the  Network  function.  See  owner’s

manual “Network Set-up and Operation” .

 • When the Input Search function is set to On1 or On,

the input signal will be searched automatically (p.47).

Use the Point

▲▼

buttons to select Component or

and then press the SELECT button.