Sony VPL-HS1 Manuale Utente

35

 GB

Troubleshooting

The picture flickers.

• DOT PHASE in the INPUT SETTING 

 menu has not been adjusted 

properly.
c Adjust DOT PHASE in the INPUT SETTING 

 menu properly (

On-screen display does not appear.

• STATUS in the SET SETTING 

 menu is set to OFF.

c Set STATUS in the SET SETTING 

 menu to ON (

1 page 20).

No sound.

• Cable is disconnected or the connections are wrong.

c Check that the proper connections have been made (1 pages 8 and 9).

• VOLUME setting is not correct.

c Adjust VOLUME in the PICTURE CTRL 

 menu, or press VOLUME + on 

the remote control.

When sound is input through the 
AUDIO connector, sound comes 
through one channel only.

• Monaural sound is being input through the AUDIO connector.

c Input stereo sound.

The remote control does not work.

• Batteries cound be weak.

c Replace the batteries (1 page 5).

• The polarity is not correct.

c Insert the batteries with correct polarities (1 page 5).

The “Memory Stick” cannot be inserted 
into the “Memory Stick” slot.

• The “Memory Stick” is not facing in the correct direction.

c Insert the “Memory Stick” with the arrow mark pointing toward the “Memory 

Stick” slot of the projector.

A still picture in the “Memory Stick” 
cannot be rotated or deleted.

• The write-protect tab on the “Memory Stick” has been set to LOCK.

c Cancel the lock (1 page 22).

• The picture is protected.

c Release the protect in the Index screen (1 page 29).

The “Memory Stick” cannot be 
formatted.

• The write-protect tab on the “Memory Stick” has been set to LOCK.

c Cancel the lock (1 page 22).

• The “Memory Stick” is broken.

c Use another “Memory Stick”.

When the slide show is made, the MS 
flashes.

• Pictures with different resolutions are used for the slide show.

c Set STATUS of the SET SETTING 

 menu to OFF (

When the slide show is made, a black 
picture appears.

• When pictures with different resolutions are used, a black picture appears. 

c Set the resolution of the pictures to the same setting.

The thumbnails are not displayed.

• The pictures are the JPEG format but not DCF-compatible.

c Use the DCF-compatible pictures.