Epson S5 Series/77c Manuale Utente
40
Projecting
■
If your image looks like
or
, you need to adjust the
keystone correction value. Press the
or
buttons on the
projector to correct the shape of the image. After correction, your
image will be slightly smaller.
image will be slightly smaller.
■
On the PowerLite 77c, you may need to turn on Auto Keystone.
See page 61 for instructions.
See page 61 for instructions.
You can also make keystone adjustments using the projector’s Settings
menu. See page 62.
menu. See page 62.
Adjusting the Brightness
The brightness of an image depends on the source you are projecting
and the amount of light in the room. If the image is too bright or not
bright enough, here are two ways you can adjust it:
and the amount of light in the room. If the image is too bright or not
bright enough, here are two ways you can adjust it:
■
Change the
Brightness
■
Select
Low
or
High
for the
Brightness Control
option in the
Settings menu. (See page 62.) Low brightness mode extends the
life of the lamp and decreases the fan noise.
life of the lamp and decreases the fan noise.
PowerLite S5 Series
PowerLite 77c