Epson S5 Series/77c Manuale Utente

When you’ve finished using the projector, follow the recommended 
procedure to shut it down:

1. If you’re using a computer, shut it down first; otherwise you may 

not be able to see your computer’s display to shut it down 
properly.

2. To turn off the projector, press the P 

Power 

button on the 

projector or remote control.

You see this confirmation message: 
(If you don’t want to turn it off, press 
any other button or wait a few 
seconds until it disappears.)

3. Press the P 

Power

 button again. The projector beeps twice, the 

lamp is turned off, and the power light turns orange.

With Epson’s exclusive Instant Off

®

 technology there’s no 

cool-down period, so you can pack up and go immediately after 
turning off the projector.

If you want to turn the projector on again, press the P 

Power

 

button.

4. Press up on the blue foot release lever and lower the projector to 

retract the front adjustable foot.

5. Close the 

A/V Mute

 slide.

6. Unplug the power cord.

7. Turn off and disconnect any equipment 

plugged into the projector.

8. If you won’t be using the projector for 

awhile, store it in the soft case that came 
with it or in a protective case. 

When the projector has not 
received any input signals for 
30 minutes, it automatically 
turns off the projector lamp 
and enters “sleep mode.” This 
conserves electricity, cools the 
projector, and extends the life 
of the lamp. If you are done 
using the projector, unplug 
the power cord. If you want 
to start projecting again, press 
the P 

Power