Epson S5 Series/77c Manuale Utente
68
Fine-tuning the Projector
7. When you see this screen, select a zoom rate (display size), and
then press
Enter
.
8. When you see the message
Save image as user’s logo?
, select
Yes
and press
Enter
. Saving the logo takes a few moments. Do
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
while the logo is being saved.
9. When you see the message
Completed
, press
Esc
.
10. To display the logo as the background screen when the
A/V Mute
button is pressed, select the
Extended
menu and press
Enter
.
11. Select
Display
and press
Enter
.
12. Select Display
Background
and press
Enter
. Then select
Logo
and press
Enter
.
13. When you’re finished, press
Menu
to exit the menus.
Setting a Password
1. Press the
Freeze
button on the remote control for about 7 seconds
until you see the Password Protect menu:
note
The default setting for the
Startup Screen
option
menu is
ON
. If the
Startup
Screen
is set to
OFF
, the
logo will not display at
startup.
startup.
If the User’s Logo Protect
function has been set to
function has been set to
ON
,
the
Display Background
setting cannot be changed.
You need to turn the protect
function off first. See page 69
for details.
You need to turn the protect
function off first. See page 69
for details.
Once you’ve saved a user’s
logo, you cannot reset the logo
setting to its factory default
(no logo).
logo, you cannot reset the logo
setting to its factory default
(no logo).
note
If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 70.
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 70.