Epson S5 Series/77c Manuale Utente

When the password function is enabled, you see this screen when you 
turn on the projector:

Use the numeric buttons on the remote control to enter the password. 
Once you have entered the password correctly, the password screen 
closes, and projection begins.

If the password is not correct, you see the message 

Wrong password. 

Please try again.

 If you enter an incorrect password three times in 

succession, you see the message 

The projector’s operation will be 

locked. Request code xxxxx

 and the projector switches to standby 

mode for approximately 5 minutes. Write down the request code. 
Then disconnect the projector’s power cord from the electrical outlet, 
reconnect it, and turn the projector back on. 

When you see the Password Protect Release screen again, you can try 
to enter the correct password.

If you have forgotten the password, contact Epson with the request 
code number that appears in the Password Protect Release screen for 
assistance. See “Where To Get Help” on page 93.

If you enter an incorrect password 30 times in succession, the 
projector remains locked and you must contact Epson to have the 
projector serviced.