EIKI QXXAVC922---P Manuale Utente

Network Capture screen

Confirm that the projector has connected to the LAN properly.

1. Activate “Network Capture 4” which is installed into the computer connected to the LAN .
2. After “Searching projector” message appears, the name of the projector* appears on the Network 

Projector List, then the network setting has completed properly.

  When the name of the projector does not appear and error screen appears, the network has 

not connected yet. Try searching again with the  Search PJ button. If error screen appears again, 
reconfirm the LAN setting. When the projector is set in the location separated by the router, see next 
page.

  When Firewall function (Anti-virus software) is effective, network projector may not be found.  In that 

case, disable the Firewall function and try searching again.

✳ 

If the projector is named, the name will be displayed. The name can be set with the following  

procedures in “6. Basic setting and operation” ➔ “Initial setting” (p48) . If the projector is not named, 
IP address of the projector will be displayed.

Network Projector List

Search PJ button