JVC DLA-HX2U Manuale Utente

25

• Messages are displayed in the language set

by the user in the “Language” menu. The pre-
set language upon purchase is “English”. The
user can choose from 8 national languages.
(

☞ page 39)

However, the input mode ([PC1], [PC2],
[PC3], [Y/C], [VIDEO]) and button indications
([FREEZE], [D.ZOOM], [EXIT]) are only dis-
played in English irrespective of the display
language setting.

1

Insert the power cord into the wall outlet
• The [STAND BY] indicator lights up when the main power is

inputted.

2

Press the [OPERATE] button on the projector (or the [OP-
ERATE] button on the remote control unit) for one second
or more
• The [OPERATE] indicator lights up and the projected image

slowly appears.

 Press [VIDEO] to select which of the image devices of those

• Each time you press either button, the selected input changes

as follows.

• Upon projection, the image may flicker for a few seconds, but

this is not a malfunction.

• When the lamp is turned on, it will slowly become brighter. It

will take more than a minute for the brightness to stabilize.

[VIDEO] : Image from the input [VIDEO]

terminal on the right hand side
of projector will be projected.

[Y/C]

: Image from the input [Y/C] ter-

minal on the right hand side of
the projector will be projected.

2

2

Once the basic settings are done, follow the procedures below:

Light on

  Projector: Indicator

Light on

  Projector: Indicator

Remote
control unit

Projector:
Control panel

Remote
control unit

Projector:
Control panel

• Sound is formed from sound signals connected to the [AU-

DIO IN] terminal.

• When no image is input to the selected input terminal, the

message “No Input” is displayed on the screen. (

☞ page 53)

If projector set up is not yet complete, please read ‘Adjustments and Settings Using Menus’ on page 32 and perform the necessary
settings.

[VIDEO]

[Y/C]