JVC DLA-HX2U Manuale Utente

26

Basic Operations

 Display using the direct buttons

The direct buttons enable direct switching and op-
eration without having to go through the menu.

Input mode can be selected
by pressing the [PC] button or
the [VIDEO] button.

When the [DIGITAL ZOOM], [VOLUME], [V-KEY-
STONE] or [H-KEYSTONE] buttons are pressed,
the level bar of the function is displayed.

When “Line display” (

☞ page 39) is set

to “5sec” : After changing an input , the
new selection will appear on the screen
for about 5 seconds.

 To select a computer or other devices connected to [PC1],

• Upon pressing the button, the input mode changes as follows.

When “Line display” (

☞ page 39) is set

to “5sec”: After changing an input, the
new selection will appear on the screen
for about 5 seconds.

• Sound is formed from sound signals connected to the [AUDIO IN]

terminal.

• When no image is input to the selected input terminal, the mes-

sage “No Input” is displayed on the screen. (

☞ page 53)

• When the [PC2] input terminal is used, “PC2(BNC)” must be se-

lected from the “Options” item in the main menu. (

☞ page 39)

 To enlarge the screen size: Turn the zoom ring towards the

‘Wide side’

 To reduce the screen size: Turn the zoom ring towards ‘Tele

side’

 To focus on nearer points: Turn the focus ring towards the

‘Near side’

 To focus on farther points: Turn the focus ring towards the

‘Far side’

[PC1]: Projects image from [PC1] input terminal on

the right hand side of the projector.

[PC2]: Projects image from [PC2] input terminal on

the right hand side of the projector

[PC3]: Projects image from [PC3] input terminal on

the right hand side of the projector.

‘Tele side’

‘Wide side’

‘Near side’

‘Far side’

Remote
control unit

Projector:
Control panel