Printronix T5000 Manuale Utente
QUICK SETUP Submenus
41
QUICK SETUP Submenus
Print Intensity
Specifies the level of thermal energy from the printhead to be used
for the type of media and ribbon installed.
for the type of media and ribbon installed.
Large numbers imply more heat (thermal energy) to be applied for
each dot. This has a significant effect on print quality. The print
intensity and speed must match the media and ribbon type to
obtain the best possible print quality and barcode grades.
each dot. This has a significant effect on print quality. The print
intensity and speed must match the media and ribbon type to
obtain the best possible print quality and barcode grades.
The range is -15 through +15:
•
In Transfer mode, the default is -3.
•
In Direct Thermal mode, the default is 0.
QUICK SETUP
(cont. from previous page)
SMT: Status
Toolset [1]*
Toolset [1] to Toolset [4]
SMT: Sel Toolset
Disabled*
Enabled
EPC
1
zEPC
2, 3
SMT: Select Tool
Notes:
* = Default.
1
Appears only if Toolset [1] is selected under
SMT: Sel Toolset.
SMT: Sel Toolset.
2
Appears only if Toolset [2] is selected under
SMT: Sel Toolset.
SMT: Sel Toolset.
3
Undocumented options are reserved for internal
use and future design.
use and future design.
UPCA
1
zUPCA
2, 3
EAN8
1
zEAN8
2, 3
EAN13
1
zEAN13
2, 3
UCC128
1
zUCC128
2, 3
GTIN
1
zGTIN
2, 3