Philips 5900 Manuale Utente

AXIS 5900 User’s Manual

109

4. Click 

OK to create the network group.

You can edit the properties of each network group from the Network 

Groups page. Simply select the network group from the list and use one of 

the Edit, Copy or Remove commands.

Follow the instructions below to access the print server using AXIS 

ThinWizard:

1. Click 

Manage Network in the main menu.

2. Select the network group, including the, from the drop-down list. All AXIS 

servers included in the network group appear in the window.

3. Click the link of the AXIS 5900 to access its internal Web page.

4. The ‘Srv’ and ‘Dev’ columns show the status of your print servers and printers.

Using AXIS ThinWizard you can also set or change each print server’s IP 

parameters.

1. Click 

IP Settings in the main menu.

2. Select print server in the list.

3. Enter your data: IP address, Subnet mask, Default gateway and the print 

server’s password (default password is 

pass).

4. Click 

Set to save your settings.

5. Click 

Rescan to update AXIS ThinWizard and see the changes.

If Your Print Server is

not Shown in the List

If your print server is not shown in the list, click “Click here...”. By 

entering the serial number of the print server (found on the underside 

label) you will be able to set the print server’s IP parameters. 

Example: 00408c181cf0

Refer to “Using AXIS ThinWizard for Print Server Management” on page 

107 for more information about upgrading Axis servers using AXIS 

ThinWizard.

Using AXIS ThinWizard it possible to change the settings of several Axis 

servers simultaneously. It is also possible to copy the configuration from 

one server to another. This is a convenient way to install a new server, 

based on the settings of an already existing server.

For additional information, please refer to the AXIS ThinWizard online 

help.