Philips 5900 Manuale Utente

110

AXIS 5900 User’s Manual

Having assigned an IP address to your Axis Network Print Server, as 

described in “Assigning an IP Address to the Print Server” on page 16, 

you can change the Axis Network Print Server parameter settings using 

the File Transport Protocol (FTP).

Ensure that FTP Enabled is set to yes. To check this parameter, browse to 

the print server and select Admin | Network Settings | Detailed View | 

TCP/IP Network.

Editing the config file

Follow the instructions below to edit the config file using FTP: 

1. Log in to the Axis Network Print Server by typing:

ftp <host name>

- or -

ftp <IP address> 

in a Command window (Windows and OS/2) or in a Mac/UNIX/Linux 
Terminal.

2. Enter the user id and the password. (The default entries are 

root

 and 

pass

.

)

3. Download the 

config file to your host by typing:

get config

4. Edit the file using your preferred text editor.

5. Save the 

config file to the Axis Network Print Server by typing: 

put config CONFIG

The example on the next page shows how to upload and download the 

config file using FTP from a DOS window.

•  It is important that the destination file is specified in capital letters. Otherwise 

the edits are temporary and will be lost once the Axis Network Print Server has 
been powered down.

•  To edit the config file from a Macintosh you will need FTP support such as 

MacTCP, Fetch or Anarchie. The procedure for editing the file is the same as 
described above.