Philips 5900 Manuale Utente

90

AXIS 5900 User’s Manual

7. If you do not have a default password, just click 

Next >. If some of your 

servers use a different User ID or Password than the default entries, they will 
be displayed in the 

Remaining servers list. Enter the User ID and Password 

for each individual server. Click 

Next >. 

8. Name the upgrade job. This is optional, so you can leave the field blank if 

you want. Click the 

Start button to start the upgrading job.

9. You can view the progress of the job in the Event Log.

Refer to “Using AXIS ThinWizard for Print Server Management” on page 

107, for more information about AXIS ThinWizard.

To upgrade over the network using FTP you will need a file with the new 

print server firmware. The name of this file is in the form 

product_version.bin

.

Ensure that FTP Enabled is set to yes. To check this parameter, browse to 

the print server and select Admin | Network Settings | Detailed View | 

TCP/IP Network.

Caution!

The objective of this example is to upgrade a print server to firmware 

version 7.00.

The description below from a typical Windows session uses the following 

examples:

• Print server model: AXIS 5900
• IP address of print server: 10.13.4.105
• New firmware version name: 5900p_v2_7_00.bin
• Location of firmware and upgrade procedure: c:\Axis

Be careful not to interrupt the file transfer. If the transfer is interrupted, the print server may 

have to be re-initialized by your dealer.