Manualsbrain.com
  1. Manuali
  2. Marche
  3. Philips
  4. 5900
  5. Manuale Utente

Philips 5900 Manuale Utente

Scarica
Pagina di 160
Management and Configuration
92
AXIS 5900 User’s Manual
Section 10
Management and Configuration
The management and configuration tools that are supported by the Axis 
Network Print Server allow you to:
•
Change the print server parameters, i.e. editing the 
config 
file
•
Receive extended information about the print jobs
•
Receive printer port status
•
Monitor your printers
•
Reset the Axis Network Print Server to Factory Default
Configuration
Overview
The method you should use to manage and configure your Axis Network 
Print Server depends on the operating system protocols of your network. 
The table below displays which method to use for each supported 
environment.
Note:
Using a Web Browser for Print Server Management
Once you have established the Axis Network Print Server in the TCP/IP 
Server” on page 16, you are free to access the Axis Network Print Server 
Web pages from any standard Web browser.
The Web interface of the Axis Network Print Server is divided into two 
modes of operation, User mode and Admin mode:
User
In User mode you can change language, but you have no rights to change 
any other parameters. However, if you have access rights to the Admin 
mode, you can change some of the basic parameters from User mode via 
the Configuration Wizard. This mode is intended for regular users who are 
only interested in using the print server's interface for checking print jobs 
or viewing printer properties. If you want to change any other of the print 
server's settings, you must enter the Admin mode.
Operating System Protocols
Configuration/Management methods
WLAN, TCP/IP
(UNIX, Windows, NetWare Pure IP, OS/2)
IPX/SPX (NetWare)
Novell Utilities - See page 119
AppleTalk over TCP/IP
BOOTP and TFTP are powerful tools for configuring the Axis Network Print 
Server. Refer to the documentation for the BOOTP/TFTP server on your 
system for specific information.