Philips 5900 Manuale Utente

AXIS 5900 User’s Manual

93

Admin

When in Admin mode, you have access to all the print server's parameters 

and you can change them to your liking. This mode is intended for 

network administrators and can be password protected to prevent 

unauthorized changing of the print server parameters.

Follow the steps below to access the internal Web pages of the Axis 

Network Print Server: 

1. Enter the print server’s IP address (or host name) in the 

Location/Address 

field of your Web browser. Press 

2. The 

Printer Overview page will appear. Click Admin to access the 

Administration Web pages.

3. If you have changed the User/Password combination, you will be prompted 

for them. Click 

OK.

To protect the Admin pages from unauthorized use, it is highly recommended that you change 
the default password. 
This is done from the 

Admin | General Settings | General tab. Enter the password in the Root 

Password field.

• You can address the print server’s Web interface via 

https:// To do this you must enable 

the SSL/TLS protocols in the Web interface: 

TCP/IP Network and set the HTTPS Enabled parameter to Yes (you must have a valid cer-
tificate loaded). If you do not have a valid certificate loaded, select

Settings and click Create.