Zebra Technologies RZ400 Manuale Utente

Operations
Adjust Printhead Pressure

79695L-003

Z Series

/RZ™ Series User Guide

1/11/11

You may need to adjust printhead pressure if printing is too light on one side, if you use thick 
media, or if the media drifts from side to side during printing.

. The ZM400 and RZ400 pressure adjustment dials have four possible settings 

designated by blocks of increasing size embossed on the print mechanism. The smallest block 
(fully counterclockwise) is considered position 1, and the largest block (fully clockwise) is 
considered position 4. The ZM600 and RZ600 dials have seven settings instead of four.

 or 

 to select the initial dial settings for your media, depending on 

which printer you have.

Outside dial

Inside dial

1 in. (25.4 mm)

3

1

2 in. (51 mm)

4

1

3 in. (76 mm)

3

2

3.5 in. and up (89 mm and up)

3

3