Zebra Technologies 7030 Manuale Utente
113
Specifications
Paper Specification
10/05/2009
TTP 7030™ Technical Manual
P1003636-002
Perforation
Preprinting
Tear-off perforation
Punching must be done from outer side (thermal coating side)
with a sharp perforation tool.
with a sharp perforation tool.
General
To endure the heat developed during printing, the preprint
must meet the requirements applicable for preprinting on
paper intended for laser printing. OCR-blind ink must be used
for preprint on the inner side of the roll.
Ink used for preprinting on the thermal side must be non-
abrasive.
The ink must not smear while wound up on the supply roll or
during the printing process.
must meet the requirements applicable for preprinting on
paper intended for laser printing. OCR-blind ink must be used
for preprint on the inner side of the roll.
Ink used for preprinting on the thermal side must be non-
abrasive.
The ink must not smear while wound up on the supply roll or
during the printing process.
Print side
One side or both sides.