Toshiba 960-498 Manuale Utente

The following describes the procedure for installing the SJ board (See Figure 4-37). 

1.  Pass through the SJ board flat cable into the slit of the middle frame and arrange it 

along the guide on the insulator. Secure the SJ board flat cable with a glass tape. 

2.  Install the SJ board and secure it with the following screw. 

•  M2×4Z BIND 

screw   x1 

3.  Connect the SJ board flat cable to the connector CN9560 on the SJ board. 

4.  Connect the microphone cable to the connector CN6000 on the SJ board.