DELL 530b Manuale Utente
Removing and Installing Parts
147
8 If you are not replacing the drive, reinstall the drive panel insert
10 Connect your computer and devices to electrical outlets, and then turn
them on.
11 Check the system setup for the appropriate diskette Drive Option changes
Installing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 105.
2 Remove the computer cover (see "Removing the Computer Cover" on
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the bezel (see "Removing the Bezel" on page 136).
4 If you are installing a new floppy drive rather than replacing a drive, align
4 If you are installing a new floppy drive rather than replacing a drive, align
the tip of a Phillips screwdriver with the slot on the break-away metal plate
and rotate the screwdriver outwards to break the metal plate.
and rotate the screwdriver outwards to break the metal plate.
5 Gently slide the floppy drive into place in the FlexBay slot.
6 Align the screw holes in the floppy drive with the screw holes in the FlexBay.
6 Align the screw holes in the floppy drive with the screw holes in the FlexBay.
book.book Page 147 Monday, October 6, 2008 11:28 AM