DELL 530b Manuale Utente
166
Removing and Installing Parts
Removing the Processor Fan/Heat Sink Assembly
NOTICE:
Do not touch the fan blades when you are removing the processor
fan/heat sink assembly. This could damage the fan.
1 Follow the procedures in "Before You Begin" on page 105.
2 Remove the computer cover (see "Removing the Computer Cover" on
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Disconnect the processor fan cable from the system board (see "Inside
4 Carefully move away any cables that are routed over the processor fan/heat
sink assembly.
5 Loosen the four captive screws securing the processor fan/heat sink
assembly and lift it straight up.
CAUTION:
Despite having a plastic shield, the heat sink fan assembly may be
very hot during normal operation. Be sure that it has had sufficient time to cool
before you touch it.
before you touch it.
NOTE:
The processor fan/heat sink assembly in your computer may not look
exactly like the one shown in the illustration above.
1
processor fan/heat sink assembly
1
book.book Page 166 Monday, October 6, 2008 11:28 AM