DELL 530b Manuale Utente

Removing and Installing Parts

167

Installing the Processor Fan/Heat Sink Assembly

 

NOTICE: 

When reinstalling the fan, ensure that you do not pinch the wires that run 

between the system board and the fan.

1 Align the captive screws on the processor fan/heat sink assembly to the 

four metal screw hole projections on the system board.

 

NOTE: 

The processor fan/heat sink assembly in your computer may not look 

exactly like the one shown in the illustration above.

2 Tighten the four captive screws.

 

NOTE: 

Ensure that the processor fan/heat sink assembly is correctly seated 

and secure.

3 Connect the processor fan/heat sink assembly cable to the CPU_FAN 

system board connector (see "Inside View of Your Computer" on 
page 109). 

4 Replace the computer cover (see "Replacing the Computer Cover" on 

5 Connect your computer and devices to an electrical outlet, and turn them on. 

1

processor fan/heat sink assembly

1

book.book  Page 167  Monday, October 6, 2008  11:28 AM