Apple WS 9650 Manuale Utente

 

 Troubleshooting

Symptom Charts/Problems with Jack•Hammer Ultra SCSI Card 

 

This section covers problems you may experience when the 

Jack•Hammer Ultra SCSI card is installed in the WS 9650.

SCSI signal degrada-

tion, including:            

1)Devices attached to 

JackHammer do not 

appear on Desktop 

2)System hangs or 

freezes                       

3) System has bootup 

problems (primarily 

a blank gray screen) 

4)Slow performance

1 Check each device and make sure all have unique SCSI IDs.

2 Make sure all devices at ends of the SCSI bus are properly 

terminated.

3 Make sure all cables are securely connected. (Incorrectly 

seated cables may exhibit burn marks.)

4 Make sure JackHammer is securely seated in its slot.

5 Open PCI SCSI JackHammer Control Panel and see if 

JackHammer appears in scroll box. If not, conduct 

JackHammer self-diagnosis as follows: 

•  Load CD-ROM system disc that came with WS 9650 (or 

prepare to boot from a drive not connected to Ultra SCSI 

bus).